Every drop counts
According to the U.S. Environmental Protection Agency (EPA), each American uses an average of 88 gallons of water every day at home.
Bathrooms are the largest use of water in the home, using more than 50 percent of all indoor water.
Approximately 5 to 10 percent of US homes have easy-to-fix leaks that drip away 90 gallons a day or more.
Residential outdoor water use across the US accounts for nearly 9 billion gallons of water each day, mainly for landscape irrigation.
On average, a urinal in a public place gets flushed 18 times per day.
Heating water is typically the second largest use of energy in a home (after space heating and cooling).
Did you know?
Replacing shower heads with WaterSense- labeled models can save 4 gallons of water every time you take a shower?
Replacing old, inefficient faucets and aerators with WaterSense-labeled models can save 700 gallons of water per year?
Replacing a standard clock timer with a WaterSense-labeled irrigation controller can save your home nearly 8,800 gallons of water?
WaterSense-labeled faucets—or aerators that can be installed on existing bathroom faucets—are about 30 percent more efficient than standard faucets while still providing sufficient flow?
Homes that earn the WaterSense label feature WaterSense-labeled plumbing fixtures, efficient hot water delivery, smart landscape design, and many other features to ensure that the home will save water for years to come?
The WaterSense label makes it simple to find water-efficient products, new homes, and programs that meet EPA’s criteria for efficiency and performance. WaterSense-labeled products and services are certified to use at least 20 percent less water, save energy, and perform as well as or better than regular models.
How well do you conserve water?
The government’s EPA estimates that the average family of four uses 146,000 gallons of water per year, at a cost of $700. With just a few small changes, however, that cost could drop by as much as 28%.
You’ll save on more than just your water bill, too. You may save on Plano taxes.
This is because water management is often handled at the municipal level and as water usage grows, so does the need for costly investment in water treatment and delivery systems. Less usage means lower costs.
You’ll also enjoy lower home energy bills. 25 percent of a home’s energy bill is used for heating water for home use.
So, here are three ways to cut your household water usage.
Catch Your Shower Water
Nobody likes to step into a cold shower, and we sometimes run our showers for 5 minutes before stepping in. Even with today’s low-flow shower heads, that’s 10 gallons of water wasted. Instead of allowing pre-shower water to run down the drain, catch it in a bucket, instead. Then use the bucket to water houseplants and your garden.
Stop Pre-Rinsing Dishes
Today’s dishwashers are heavy-duty food busters. Don’t pre-rinse dishes in the sink, only to move them to the dishwasher where the job will be duplicated. Instead, use a wet sponge to wipe dishes clean, then place them in the dishwasher. The job will get done just as well. Or, for caked on foods, follow the steps above then start the dishwasher. After 3 minutes, pause the cycle to allow water to sit-and-soak on your dishes. Then, restart the cycle as normal.
Test Your Toilets
A single leaking toilet can spill 60 gallons of water per day and there are several places where leaks can occur. The toilet may have a worn out flapper; or, a damaged gasket under the flush valve; or, a crack in the overflow tube. One clear sign of a leak is having to jiggle the handle to make the toilet stop running. To test for leaks, try “the dye test”. Fill the toilet tank with food coloring or instant coffee to a deep color and wait 30 minutes. If any of the colorings finds it way to the toilet bowl, you know you have a leak.
In addition to the tips above, the EPA keeps a list of water-saving steps on its website. See how many steps you can take to reduce your home water usage.
(Image courtesy: EPA.gov)